archive

archive valves

21EVP4 tube: datasheets and technical data

Explore available pinout, electrical data and related types for the 21EVP4 vacuum tube.

1 PDF datasheets available

The 21EVP4 is a Philco rectangular direct-view picture tube in the 21-inch class, designed for television sets with reduced depth. Its sheet describes an exceptionally short neck and magnetic shielding built into the electron gun. According to the manufacturer, this permits deflection yokes without special magnetic shields despite the short neck. The beam is focused electrostatically and deflected magnetically, with an approximate diagonal angle of 110°. The straight gun needs no ion-trap magnet. The integral glass-button base carries straight-through leads and an indexing lug; Philco identifies its yellow colour as a sign of the internal shielding.

The screen uses white P4 phosphor with medium persistence; according to the sheet, the faceplate transmits approximately 75.5% of the light at its centre. The heater operates at 2.68 V with a 10% tolerance and draws 0.45 A at its rated voltage. The table distinguishes 16 kV as a typical anode voltage from 20 kV as an absolute limit: they are not equivalent operating values. The documentation covers both grid and cathode modulation, with different focusing-voltage ranges. Values from the two circuits therefore must not be combined or applied indiscriminately. A safety note warns that X-ray shielding may be necessary for people close to the tube at anode voltages above 16 kV.

The dimensions illustrate the difference between nominal class and visible area. The bulb's nominal outside diagonal is 21⅜ inches with a ⅛-inch tolerance; the minimum useful-screen diagonal is instead 20¼ inches. Nominal overall length is 12 15⁄16 inches with a ¼-inch tolerance, while neck length is 3 11⁄16 inches with a 1⁄16-inch tolerance. These are separate mechanical references when assessing installation in a chassis. The sheet identifies bulb J171G1, base B7-208, basing diagram 8JK and anode contact J1-21. The diagram shows two heater connections, two second-grid connections and separate first-grid, fourth-grid and cathode connections; a note states that the anode and third and fifth grids are connected inside the tube.

Mounting needs care even with the short neck. Philco specifies that the base socket must not be rigidly fixed: flexible leads should let it move, preventing the wiring from transmitting lateral strain to the pins. Philco's stated 11-second heater warm-up belongs to a defined test: it measures the time for heater voltage to reach 80% of its rated value, with a specified supply and series resistance. It is not a promise of picture appearance time. The tentative sheet cites a September 1959 technical release.

Pinout and connections

Electrical data

Heater

Heater voltage Vh
2.68 V
Heater current Ih
0.45 A

Datasheet PDF

PDF Language Pages Manufacturer
21EVP4.pdf 2 Philco

EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34

74,001 Valvole ricercabili sul sito
18,704 Datasheet PDF disponibili

How to use the Valve Archive

EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.

Datasheet PDF and frequent searches

The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.