archive
archive valves
archive
archive valves
6M7 tube: datasheets and technical data
Explore available pinout, electrical data and related types for the 6M7 vacuum tube.
The 6M7 is a variable-slope radio-frequency pentode. The Mazda sheet issued by Compagnie des Lampes in September 1947 presents it for class A amplification: control-grid bias can progressively reduce transconductance and thus gain, a useful property in radio stages subject to signal-level control. The date identifies this document, not the valve's introduction year.
The cathode is indirectly heated and the heater requires 6.3 V at 0.3 A, with either DC or AC supply. The maker lists three operating conditions, all with the control grid at −2.5 V: at 100 V on both anode and screen grid, anode current is 6.2 mA and transconductance 2.1 mA/V; at 250 V on the anode and 100 V on the screen they are 6.5 mA and 2.4 mA/V; raising the screen to 125 V while keeping the anode at 250 V gives 10.5 mA and 3 mA/V. These are separate measured operating points and must not be combined into one regime.
The version described by Mazda has a metal envelope and an octal 6209 base, with a top cap for the control grid. From the pin view specified in the sheet, pins 2 and 7 feed the heater, 3 is the anode, 4 the screen grid, 5 the suppressor grid and 8 the cathode; pin 1 is marked ground and pin 6 is physically absent. The sheet calls for the suppressor grid to be connected to the cathode contact at the socket: this is external wiring. The top cap, which separates the control grid from the bottom contacts, is a practical detail to check when tracing a circuit or finding the correct replacement.
Mazda's four sets of curves show how anode and screen-grid currents vary with voltage and bias. They convey more than a single nominal figure when examining a stage's operating point. A period example appears in Georges Giniaux's «Comment recevoir les ondes courtes»: in the Métox 8543 communications receiver, the 6M7 is named in two radio-frequency amplifier stages and two intermediate-frequency stages. This documents a specific use of the unsuffixed 6M7; it does not imply that every set containing the valve had the same architecture.
Tube images
Pinout and connections
Electrical data
Heater
- Heater voltage Vh
- 6.3 V
- Heater current Ih
- 0.3 A
Substitutes
Datasheet PDF
| Language | Pages | Manufacturer | |
|---|---|---|---|
| 6M7.pdf | fr |
EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34
How to use the Valve Archive
EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.
Datasheet PDF and frequent searches
The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.