archive
archive valves
archive
archive valves
EL51 tube: datasheets and technical data
Explore available pinout, electrical data and related types for the EL51 vacuum tube.
The EL51 is a power pentode for output stages, documented especially in two-tube push-pull audio circuits. A Philips Miniwatt sheet is dated 1 December 1940; later Philips sheets and a Tesla sheet show operation under different conditions. The tube has an indirectly heated 6.3 V, 1.9 A heater, a European side-contact base and a plate connected to the top cap. The 45 W often associated with the EL51 denotes maximum plate dissipation in the consulted sheets, not the audio power that one tube delivers to the load.
The 1940 Philips Miniwatt sheet limits operating plate and screen-grid voltage to 500 V. It shows a push-pull pair at 500 V on both electrodes, with a 4.8 kΩ plate-to-plate load and a common 100 Ω cathode resistor: the example gives 67.5 W output and 4% total distortion. The 1953 Philips sheet instead lists 750 V as the operating limit for plate and screen and presents another example, in class B, with two EL51s at 750 V and a 6 kΩ plate-to-plate load. It gives 140 W output and 5% distortion for that circuit. These editions should not be merged into a single prescription for every specimen or circuit.
In Philips's 750 V example, the screen operates at the same nominal voltage as the plate, but the common screen-grid supply needs protection against overload. The manufacturer proposes a 1,000 Ω resistor or, as the document's preferred solution, a special 550 V, 68 W incandescent lamp in series. This is an unusual design detail expressly recorded in the sheet; it does not mean an ordinary bulb can be chosen without regard to circuit requirements. Philips's class-AB stage at 500 V, with self-bias and two tubes, is instead rated at about 67.5 W output under its own stated conditions.
Tesla also publishes examples using two EL51s in push-pull: about 70 W at 500 V in self-biased class AB and 125 W at 750 V with fixed bias, with the distortion and currents of its respective circuits. Differences from the Philips numbers require comparison of load, bias, current and measurement conditions before assessing a substitution or restoration. The existence of a 1940 sheet documents the tube by that date without proving its exact introduction year. Documentary sources: Philips Miniwatt EL51, 1 December 1940; Philips EL51, sheet 939 4241–4242, 4 April 1953; Philips EL51 Pentode, pp. 257–259; Tesla EL51, technical sheet and curves, pp. 1–9.
Tube images
Pinout and connections
Base: Side contact 8 (SC8)
Electrical data
Heater
- Heater voltage Vh
- 6.3 V
- Heater current Ih
- 1.9 A
Datasheet PDF
EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34
How to use the Valve Archive
EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.
Datasheet PDF and frequent searches
The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.