archive

archive valves

6CS7 tube: datasheets and technical data

Explore available pinout, electrical data and related types for the 6CS7 vacuum tube.

6 PDF datasheets available

The 6CS7 is a miniature dual triode with dissimilar sections, designed for vertical deflection in television receivers. The Sylvania and Tung-Sol sheets assign section 1 to the oscillator and section 2 to the vertical output amplifier. The two functions call for different characteristics, although they share an envelope and heater. The designation therefore does not describe two interchangeable triodes: in repair work it matters which circuit section is connected to each system.

The 6CS7 heater is rated at 6.3 V and 0.6 A. The sheets describe a controlled warm-up time of about 11 seconds under the stated test method for use in series heater strings with tubes of compatible behavior. The base is a nine-pin noval type: the anode, grid and cathode of section 1 connect to pins 6, 7 and 8; those of section 2 to pins 1, 3 and 9. Pins 4 and 5 feed the heater, while pin 2 has no connection. This pinout distinguishes the sections even when their outer appearance does not.

For average amplifier characteristics at 250 V anode voltage, Sylvania gives the oscillator section about 10.5 mA anode current, 2200 µS transconductance, an amplification factor of 17 and roughly 7700 Ω anode resistance. For the amplifier section it gives about 19 mA, 4500 µS, an amplification factor of 15.5 and roughly 3450 Ω. The corresponding grid biases are −8.5 V and −10.5 V. These are average measurement points, neither maximum ratings nor values to apply indiscriminately to both triodes.

The vertical-deflection rating tables further distinguish the two systems. The Sylvania sheet assigns the oscillator a maximum anode dissipation of 1.25 W and maximum average cathode current of 20 mA; for the amplifier the respective limits are 6.5 W and 30 mA. The amplifier also has an absolute maximum of 2200 V for a positive anode pulse, subject to the pulse conditions and duty cycle specified for a 525-line, 30-frame television system. This is not an allowable DC voltage: the same table limits the DC anode voltage of both sections to 500 V.

Sylvania warns that stages using grid-leak bias need an adequate cathode resistor or other protection when excitation is absent. Notes on pulses and heater warm-up matter as much as average values: a deflection circuit is subject to peaks that a simple Class A operating point does not represent. The RCA sheet examined is marked tentative and dated November 1958; the Tung-Sol sheet is dated December 1959. These are dates of documentation, not dates of manufacture for every 6CS7 in the archive.

Tube images

Pinout and connections

Base: Noval (B9A)

Electrical data

Heater

Heater voltage Vh
6.3 V
Heater current Ih
0.6 A

Datasheet PDF

EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34

74,001 Valvole ricercabili sul sito
18,704 Datasheet PDF disponibili

How to use the Valve Archive

EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.

Datasheet PDF and frequent searches

The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.