archive
archive valves
archive
archive valves
CV53 tube: datasheets and technical data
Explore available pinout, electrical data and related types for the CV53 vacuum tube.
The CV53 is a high-frequency triode designed for grounded-grid operation. The Admiralty Signal Establishment specification, Issue 4 of 10 March 1947, identifies the S26A prototype and a frequency range of 50–450 MHz. Our sources relate it to the commercial STC 3A/146J and describe a metal flange connected to the grid. The envelope is unmetallised glass; the indirectly heated cathode is oxide-coated on one side only and connected to one heater terminal. The disc structure and connections are therefore essential features, rather than merely an unusual external shape.
The heater requires 4 V and 0.65 A. Maximum anode voltage is 350 V, while the maximum 2 W anode dissipation requires adequate cooling. The stated amplification factor of 100 and transconductance of 5 mA/V refer to 250 V anode voltage, 4 V heater voltage and automatic bias through a 150 Ω resistor. They are therefore not measurements at 350 V or with the grid necessarily at zero relative to the cathode. Listed capacitances are 1.7 pF anode-grid, 4 pF grid-cathode and 0.035 pF anode-cathode. In the acceptance tests these are checked with the valve cold and an earthed shield around the bulb.
The document also shows tolerances: at 250 V with 150 Ω automatic bias, permitted anode current is 3.75–9 mA, with transconductance at least 4.5 mA/V and amplification factor at least 85. A test in approved apparatus requires equivalent noise resistance no greater than 700 Ω; this is a noise parameter, not anode internal resistance. The final drawing shows the anode at the top cap and heater connections on flexible leads, with the terminal joined to the cathode identified by a red spade. The specified flange diameter is 50.3–51.3 mm. These details explain why mounting is more than an ordinary socket pinout. Documentary source: Admiralty Signal Establishment, AD/CV53, Issue 4, 10 March 1947, three pages.
Tube images
Pinout and connections
Electrical data
Heater
- Heater voltage Vh
- 4 V
- Heater current Ih
- 0.65 A
Datasheet PDF
| Language | Pages | Manufacturer | |
|---|---|---|---|
| CV53.pdf | 3 |
EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34
How to use the Valve Archive
EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.
Datasheet PDF and frequent searches
The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.