archive
archive valves
archive
archive valves
DAC21 tube: datasheets and technical data
Explore available pinout, electrical data and related types for the DAC21 vacuum tube.
The DAC21 combines a detector diode and an audio-frequency amplifying triode for battery receivers. The design prioritises energy economy: its directly heated filament draws only 25 mA at 1.4 V. The Philips manual explains that achieving this consumption required a special filament construction technique and the omission of the second diode normally used for automatic gain control. In a circuit with one DAC21, the control voltage is therefore taken from the detector diode. Philips Miniwatt curves dated 1 August 1940 already document the valve.
The diode is screened from the triode to limit coupling between the sections: Philips specifies less than 0.0025 pF between diode and grid and less than 0.1 pF between diode and triode anode. The documents show versions with different base connections; the sheet of 4 April 1953 explicitly specifies an octal base, whereas the manuals illustrate a different contact arrangement. Connections must therefore be identified for the actual version. The 1953 sheet also distinguishes 1.4 V for parallel filament supply and 1.3 V for series supply.
Philips gives the triode an amplification factor of 40. At 90 V anode voltage with the grid at 0 V relative to the circuit reference, anode current is 0.45 mA and transconductance 0.30 mA/V; at 120 V they become 0.75 mA and 0.40 mA/V respectively. Actual stage gain depends on external components: in the example with a 120 V anode battery, 0.5 MΩ anode resistor and 1 MΩ grid resistance in the following valve, gain is 25 with a 3 V RMS output and 0.5% total distortion. The manual also explains how the potential distribution along the filament provides bias without a separate grid-voltage source.
An interesting application uses two DAC21 valves ahead of a DLL21 double output pentode. The first operates as an amplifier with resistance-capacitance coupling; the second triode inverts the phase and supplies the other output section with a signal displaced by 180°, eliminating the push-pull stage’s input transformer. The two DAC21 filaments together require 50 mA. Two separate diodes are also available: one for detection and the other for delayed automatic gain control. Philips specifies approximately 0.12 V sensitivity for this combination with a 120 V anode battery.
Common sheet limits include 135 V triode anode voltage, 0.1 W anode dissipation and a maximum 3 MΩ resistance between grid and filament; filament voltage limits are 1.1 and 1.5 V. The 1953 sheet gives the diode a maximum inverse voltage of 100 V, 0.2 mA direct current and 1.2 mA peak current. The manual highlights a practical precaution for the mixed series-parallel circuit using DAC21 and DF21: a poor contact or removal of a valve while powered overloads the remaining filament in the parallel branch and can reduce its emission. Documentation: English and Dutch Philips DAC21 manuals, pp. 79–82, sheets of 4 April 1953 and Philips Miniwatt curves of 1 August 1940.
Tube images
Pinout and connections
Base: International Octal (K8A) (8 pin)
| Pin | Function |
|---|---|
| 1 | tc |
| 2 | f-,s |
| 3 | m |
| 4 | a |
| 5 | nc |
| 6 | nc |
| 7 | a(d) |
| 8 | nc |
- Philips initially designed the 21-series Key Base tubes in 1940 with the nine-pin B9G base used by the EF50.
- Series production from 1942 instead used the eight-pin B8G Locktal base designed by Sylvania.
Electrical data
Heater
- Heater voltage Vh
- 1.4 V
- Heater current Ih
- 0.025 A
Datasheet PDF
EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34
How to use the Valve Archive
EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.
Datasheet PDF and frequent searches
The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.