archive

archive valves

HL13 tube: datasheets and technical data

Explore available pinout, electrical data and related types for the HL13 vacuum tube.

1 PDF datasheets available

The Mullard HL13 is an indirectly heated medium-impedance triode for DC or AC mains radio receivers. The original document explicitly refers to the HL13C for electrical data and curves, stating that the types differ only in dimensions and base connections. Its application section describes detection and low-frequency amplification. The heater requires 13 V and 0.2 A, with a stated 60-second heating time. Our sources also mention a Hivac HL13 with a 0.3 A heater: the designation alone therefore does not justify merging different manufacturers’ specifications. The main data here are Mullard’s, with a metallised envelope.

The characteristic point gives 200 V anode voltage, 5 mA, −3.7 V grid and a 740 Ω cathode resistor, with 3.33 mA/V transconductance, amplification factor 40 and 12 kΩ internal resistance. The separate RC amplifier example uses a 200 V supply, 0.65 mA, −2.6 V grid, 160 kΩ optimum load and 4 kΩ cathode resistor. Listed gain is 30 and maximum output voltage 36 V at 5% second harmonic: circuit data distinct from the triode’s factor 40. Capacitances are 3.1 pF anode-to-grid, 3.9 pF grid-to-cathode and 4.6 pF anode-to-cathode. Supplied curves show current against anode and grid voltages. Limits are 200 V anode voltage, 2 W dissipation, 10 mA cathode current, 1.5 MΩ in the grid circuit, 125 V heater-to-cathode and 20 kΩ between these electrodes.

The HL13 drawing shows a Ct8 side-contact base: viewed from below, metallisation is contact 1, heater 2 and 3, cathode 4 and anode 8, with the grid on the top cap; no connections are indicated at 5, 6 and 7. For the seven-pin HL13C, the arrangement changes to metallisation on 1, heater 4 and 5, cathode 6 and anode 7, again with a top grid connection. These differences are essential when identifying the version. The document gives HL13 overall length 101 mm and diameter 44 mm, and HL13C 120 and 43 mm. Preserved photographs and descriptions also document a Mullard specimen with a B5 base, absent from the original drawing; its 36 mm diameter and 103 mm height without pins remain specimen observations. Imported secondary numbering is not used to replace Mullard’s drawing.

Tube images

Pinout and connections

Base: M7A - British-7-Pin, old () (Codex=Sa) (8 pin)

PinFunction
1tc
2m
3h
4h
5k
6nc
7nc
8nc

Electrical data

Heater

Heater voltage Vh
13 V
Heater current Ih
0.2 A

Other available variants

Datasheet PDF

PDF Language Pages Manufacturer
HL13.pdf en 5 Mullard Radio Company Australia Ltd.

EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34

74,001 Valvole ricercabili sul sito
18,704 Datasheet PDF disponibili

How to use the Valve Archive

EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.

Datasheet PDF and frequent searches

The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.