archive
archive valves
archive
archive valves
N77 tube: datasheets and technical data
Explore available pinout, electrical data and related types for the N77 vacuum tube.
The N77 is a miniature output pentode with an indirectly heated cathode, suitable for the audio output of small receivers. The Marconi datasheet dated September 1953 describes a valve with a 6.3 V, 0.2 A heater and a seven-pin B7G base. Archive photographs document examples bearing MWT and Osram brands in a compact tubular bulb. The document covers more than a single output valve: it also gives two push-pull arrangements and curves for triode connection. The datasheet date identifies the document; by itself it does not establish when the valve was first marketed.
For one N77 in class A pentode connection, Marconi specifies 250 V at anode and screen grid, 16 mA anode current, 2.4 mA screen current, a 680 Ω cathode resistor and a 16 kΩ load. With 7.5 V peak drive, output is 1.4 W at 10% distortion. At 250 V anode and screen voltage and 16 mA anode current, internal resistance is 130 kΩ and transconductance 2.6 mA/V: the 130 kΩ value is not the output load. Pentode maxima are 250 V for anode and screen, 4 W anode dissipation and 0.6 W screen dissipation, with 150 V peak between heater and cathode. In triode connection the limit is 250 V and 4.6 W combined anode and screen dissipation; at 250 V and 16 mA, amplification factor is 11.5, internal resistance 3.85 kΩ and transconductance 3 mA/V. These are different conditions and must not be mixed with the pentode figures.
In class AB1 push-pull with self bias, the pair operates at 250 V anode and screen voltage, with a shared 600 Ω cathode resistor and a 24 kΩ anode-to-anode load. Peak drive between the two grids is 34 V: stated output is 4 W at 3.2% distortion. With fixed bias of −19 V, still at 250 V anode and screen voltage, the load drops to 20 kΩ and peak grid-to-grid drive rises to 37 V; output is 4.8 W at 3.3% distortion. Push-pull table data refer to the pair unless otherwise stated. The curves also show changes in distortion and currents as output increases: these performances belong to the documented circuits and are not guaranteed independently of the operating point.
Marconi limits DC resistance between control grid and cathode to 470 kΩ with ±20% tolerance for self bias and 100 kΩ with ±20% for fixed bias. Any mounting position is allowed, but a retaining device and free air circulation around the bulb are required. The document also notes the absence of internal and external screening and recommends designing to minimise microphony. Cold, unscreened valve capacitances are 4.2 pF anode to other electrodes, 3.2 pF grid to other electrodes and less than 0.5 pF anode to grid. Viewed from below, pin 1 is the control grid, pin 2 cathode and suppressor grid, pins 3 and 4 heater, pin 5 anode, pin 6 an internal connection and pin 7 screen grid. Maximum diameter is 19 mm; overall length is 49–55 mm and seated length 43–49 mm.
Tube images
Pinout and connections
Base: Miniature 7-pin (B7G) (7 pin)
| Pin | Function |
|---|---|
| 1 | g1 |
| 2 | k |
| 3 | h |
| 4 | h |
| 5 | a |
| 6 | ic |
| 7 | g2 |
Electrical data
Heater
- Heater voltage Vh
- 6.3 V
- Heater current Ih
- 0.2 A
Datasheet PDF
| Language | Pages | Manufacturer | |
|---|---|---|---|
| N77.pdf | en | 8 | Marconi Italiana |
EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34
How to use the Valve Archive
EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.
Datasheet PDF and frequent searches
The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.