archive
archive valves
archive
archive valves
RE79 vacuum tube: technical reference
Explore the available information on the RE79 vacuum tube in the EnryLab technical archive. This entry brings together data associated with this specific designation.
The RE79 is a directly heated Telefunken receiving triode described alongside the RE78 and RE205 in a December 1925 leaflet. The manufacturer distinguishes the three versions primarily by their bases: Telefunken for the RE78, European for the RE79 and American type for the RE205. They are presented for radio-frequency stages, audion detection and low-frequency amplification in radio receivers where low filament consumption matters and particularly high output power for large loudspeakers is unnecessary.
The thorium filament is a feature highlighted in the documentation. Heating voltage is about 2.3 V and stated current is 0.06–0.07 A; tabulated emission is 5–8 mA. The leaflet gives plate voltages of 40–90 V without presenting them as a modern set of absolute maximum ratings. The bulb's silvered appearance is consistent with the partial internal metal coating that Telefunken describes as maintaining the vacuum; its composition is not specified.
A substantial part of the leaflet concerns correct heating. Telefunken warns that exceeding the prescribed voltage can evaporate thorium from the filament and quickly render the valve unusable. It states that the correct voltage is marked on each specimen and recommends a separate regulator for every valve. The 4 V battery and approximately 40 Ω regulating resistance mentioned belong to that supply arrangement: 4 V is not the nominal voltage to apply to the filament. This detail explains the importance of adjustment in contemporary battery receivers.
The RE79 drawing shows a four-contact European base, identifying plate, grid and both filament ends without modern pin numbering. Pin diameter is 3 mm and projection 12 mm; the base body above the flange is dimensioned at 19 mm and outside base diameter at 30.4 mm. The shared table gives a 35 mm bulb diameter, 90 mm overall height excluding pins and 35 g weight. These differ from the RE78 dimensions, whose pins in the same leaflet are 4 mm in diameter: electrical kinship does not remove the mechanical connection difference.
Tube images
Pinout and connections
Base: British 4-pin (B4)
Electrical data
Heater
- Heater voltage Vh
- 2.3 V
- Heater current Ih
- 0.06 A
Datasheet PDF
Nessun datasheet PDF collegato a questa sigla.
EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34
How to use the Valve Archive
EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.
Datasheet PDF and frequent searches
The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.