archive

archive valves

RS282 tube: datasheets and technical data

Explore available pinout, electrical data and related types for the RS282 vacuum tube.

1 PDF datasheets available

The RS282 is a Telefunken triode for short-wave transmission, presented in the manufacturer’s sheet as a 100 W valve. It has an indirectly heated oxide cathode, with an 8 V heater supply and approximately 1.6 A heater current. Telefunken requires this voltage to be adjusted during operation and maintained within ±5%. Its construction has separate external connections for anode, heater and grid, as well as the cathode and the metal base’s earth connection; it is not the compact base of a common receiving valve.

Anode limits depend on wavelength. Below 7 m, the sheet specifies a maximum operating anode voltage of 800 V and peak voltage of 2500 V; above 7 m, 1000 V operating and 3200 V peak, with 4000 V peak permitted above 14 m. These distinctions show why a single maximum voltage is insufficient to describe the valve. Maximum anode dissipation is 100 W: this is power converted to heat at the anode, distinct from useful RF power supplied to the circuit.

A concrete example concerns class-B RF amplification at wavelengths of at least 50 m. With 1000 V on the anode, −60 V grid bias, RF drive of 175 V peak and a 3300 Ω load, Telefunken gives approximately 180 mA anode current, 40 mA grid current, 7 W drive power and 110 W useful output. Quiescent anode current is 45 mA. These are the complete conditions of a manufacturer example: 110 W is not guaranteed at any frequency and does not contradict the 100 W dissipation limit, which measures a different quantity. The sheet also covers grid-voltage modulation, distinguishing carrier and modulation-peak conditions.

Documented details include an amplification factor of approximately 12.5, a maximum weight of 350 g and static characteristics at several anode voltages. An important note accompanies the emission figure of approximately 0.8 A, measured with anode and grid at 180 V: the manufacturer warns that direct emission measurement can damage the valve and requires special methods. That figure must therefore not become a normal operating anode current or an improvised test setting. Understanding the RS282 requires retaining configuration, operating mode and frequency-dependent limits together.

Tube images

Pinout and connections

Base: SPECIAL TUBEBASE in general (Codex=Er)

Electrical data

Heater

Heater voltage Vh
8 V
Heater current Ih
1.6 A

Other available variants

Datasheet PDF

PDF Language Pages Manufacturer
RS282.pdf en 2

EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34

74,001 Valvole ricercabili sul sito
18,704 Datasheet PDF disponibili

How to use the Valve Archive

EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.

Datasheet PDF and frequent searches

The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.