archive
archive valves
archive
archive valves
1883 tube: datasheets and technical data
Explore available pinout, electrical data and related types for the 1883 vacuum tube.
The 1883 is a two-anode vacuum rectifier intended for the power supply of radio receivers. Mazda and Mazda-Belvu describe it as a two-plate valve: its two anodes work with a centre-tapped transformer secondary to rectify both half-cycles of the alternating voltage. A Mazda circuit shows it with a capacitor at the input of the filter, from which direct current is supplied to the receiver circuits.
The cathode is indirectly heated, and the heater requires 5 V at 1.6 A. For use with an input capacitor, both sheets give two sets of limits: 350 V RMS for each anode with a maximum rectified current of 125 mA, or a maximum of 400 V RMS per anode with a maximum rectified current of 110 mA. These are the alternating voltage applied to each anode and the direct current available under the stated conditions, not a fixed DC output voltage determined by the valve alone. Mazda's 1948 curves show that the rectified voltage varies with the current drawn and the resistance of the circuit.
The two documented constructions do not have identical outlines: the Mazda sheet specifies maximum height and diameter of 105 mm and 45 mm, while the Mazda-Belvu sheet gives maximum values of 90 mm and 38.6 mm. The pinout must also be read from the manufacturer's sheet: on both, the anodes are at contacts 3 and 6 and contacts 2, 4, 5 and 7 are unconnected; Mazda joins the heater and cathode at contact 8, Mazda-Belvu at contact 1. This difference makes it especially useful to identify the version before replacing the valve or checking the wiring of a period receiver.
Tube images
Pinout and connections
Base: Side contact 8 (SC8)
Electrical data
Heater
- Heater voltage Vh
- 5 V
- Heater current Ih
- 1.6 A
Datasheet PDF
EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34
How to use the Valve Archive
EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.
Datasheet PDF and frequent searches
The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.