archive
archive valves
archive
archive valves
19D8 vacuum tube: technical reference
Explore the available information on the 19D8 vacuum tube in the EnryLab technical archive. This entry brings together data associated with this specific designation.
The 19D8 is a combined triode-heptode, listed in the RFT sheet of February 1956 under UCH81. It is intended for gain-controlled mixer stages, but the document also provides for separate RF, IF and audio-frequency amplification. Our sources link the 19D8 designation to European equipment intended for the American market: the American-style name accompanies the European UCH81 designation here, while the data for the correct version must still be read.
The immediate difference from the ECH81 covered in the same sheet is the heater: UCH81/19D8 requires 19 V and 100 mA, suitable for a series heater chain, while ECH81 requires 6.3 V and 300 mA. The base is nine-pin noval. In multiplicative conversion the triode serves as oscillator and its grid connects to heptode grid 3. In the examples with 250 and 200 V supplies, the triode has respectively 100 and 120 V anode voltage, 5 mA current and amplification factor 22.
For the mixer heptode the sheet gives conversion transconductance of 775 µA/V under unreduced conditions and a control range of 1:100. With a 250 V supply the example uses 100 V screen voltage, −2 V on grid 1, 3.2 mA anode current and 6 mA screen current. In another application the heptode acts as an RF or IF amplifier, with the triode electrically separate from its grid 3. For VHF the document instead recommends the triode as an additive self-oscillating mixer; it mentions an additional damping resistor to stabilize amplitude on short waves.
Limits differ for the two sections: the triode has 250 V anode voltage, 0.8 W dissipation and 6.5 mA cathode current; the heptode has 300 V anode voltage, 1.7 W and 12.5 mA cathode current. The 550 V cold ratings are not normal operating voltages. The heptode screen limit is 125 V under uncontrolled conditions and may reach 300 V only with the specified anode current below 1 mA; screen dissipation is 1 W. The heater-cathode limit is 100 V. The sheet is explicitly tentative and even notes an initial height of 65 mm rather than 60.3 mm, useful for distinguishing the dimensions of the specimens described.
Pinout and connections
Base: Noval (B9A)
Electrical data
Heater
- Heater voltage Vh
- 19 V
Datasheet PDF
Nessun datasheet PDF collegato a questa sigla.
EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34
How to use the Valve Archive
EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.
Datasheet PDF and frequent searches
The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.