archive

archive valves

PM2A tube: datasheets and technical data

Explore available pinout, electrical data and related types for the PM2A vacuum tube.

1 PDF datasheets available

The Mullard PM2A is a directly heated output triode for battery receivers in the Philips-Mullard 2 V range. The manufacturer leaflet presents it for small audio output stages. Our sources place its introduction between 1929 and 1930 and describe it as able to drive a small loudspeaker. Its oxide-coated filament requires 2 V and 0.2 A: low consumption remains part of the accumulator-powered receiver context.

The Mullard document specifies 2 V maximum filament voltage and 150 V maximum anode voltage. At 100 V anode voltage and zero grid voltage it gives 3,600 Ω anode impedance, amplification factor 12.5 and mutual conductance 3.5 mA/V. The bias table gives three approximate points: 100 V anode, −3 V grid and 5 mA current; 125 V, −4.5 V and 6.5 mA; 150 V, −6 V and 8 mA. The figure also states 1.5 W maximum anode dissipation and an anode current not exceeding 10 mA. Curves extending beyond 150 V do not change the stated anode limit.

The 1.5 W dissipation rating is not useful audio power. Secondary descriptions give 0.15 W at 5% distortion and, in other presentations, figures up to 0.27 W, with cited loads of 7,000 or 8,000 Ω. These do not all carry identical conditions and do not define one reconstructable operating point. The consulted primary leaflet has no useful-output-power table. The figures nevertheless describe the context of small high-impedance audio loads in battery receivers.

The B4 base has four pins for anode, grid and the two filament ends. Photographed specimens show balloon bulbs, markings on top and horizontally mounted anodes; one has split, opened pins to improve socket grip. Descriptions give diameters of 43–45 mm and heights excluding pins of 85–88 mm for different specimens. A top-opening package with a Charing Cross Road address is attributed by our sources to a period after 1933: an assessment of the package, not a certain date for its valve.

Tube images

Pinout and connections

Base: British 4-pin (B4) (4 pin)

PinFunction
1a
2g1
3f
4f

Electrical data

Heater

Heater voltage Vh
2 V
Heater current Ih
0.2 A

Datasheet PDF

PDF Language Pages Manufacturer
PM2A.pdf en 1

EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34

74,001 Valvole ricercabili sul sito
18,710 Datasheet PDF disponibili

How to use the Valve Archive

EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.

Datasheet PDF and frequent searches

The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.