archive
archive valves
archive
archive valves
ECC189 tube: datasheets and technical data
Explore available pinout, electrical data and related types for the ECC189 vacuum tube.
The ECC189 is a variable-mu twin triode designed for VHF amplification in television tuners. Its two sections are intended particularly for a cascode circuit: the first receives the signal with its cathode grounded, while the second operates with its grid grounded. This arrangement provides gain at high frequencies while keeping noise low. It is a miniature tube with a nine-contact Noval base and an internal screen; the Mullard sheet assigns pins 6, 7 and 8 to the input triode and 1, 2 and 3 to the upper section. The indirectly heated element requires 6.3 V at 365 mA. The RCA manual lists this type as 6ES8/ECC189; heater ratings must still be checked when considering other variants.
Mullard and Mazda-Belvu sheets give each triode a nominal point near 90 V on the plate and 15 mA current, with mutual conductance of about 12.5 mA/V and an amplification factor around 34. Its control action is pronounced: a grid bias of about −5 V reduces mutual conductance to one twentieth of the nominal value, while about −9 V brings it to one hundredth. These are characterization points, not voltages to impose on every circuit. The stated maximum plate dissipation is 1.8 W per section and the working plate-voltage limit is 130 V per section. Heater-to-cathode voltage limits differ between the two triodes because the upper section's cathode may be at a higher potential in a cascode stage.
The datasheets devote attention to capacitances between electrodes and between the triodes, which form part of circuit behaviour at VHF. Mullard, for example, distinguishes values measured with and without external screening, and Mazda-Belvu identifies the internal screen on pin 9. A recurring warning concerns automatic gain control: when it controls the lower triode, the upper triode's grid must be biased through a voltage divider so that the permitted plate voltage of the first section is not exceeded. Thus, when restoring a tuner, the screen connection, physical component layout and cascode bias network matter alongside the type designation.
Tube images
Pinout and connections
Base: Noval (B9A) (9 pin)
| Pin | Function |
|---|---|
| 1 | a(2) |
| 2 | g1(2) |
| 3 | k(2) |
| 4 | h |
| 5 | h |
| 6 | a(1) |
| 7 | g1(1) |
| 8 | k(1) |
| 9 | s |
Electrical data
Heater
- Heater voltage Vh
- 6.3 V
- Heater current Ih
- 0.365 A
Datasheet PDF
| Language | Pages | Manufacturer | |
|---|---|---|---|
| ECC189.pdf | en | 2 | Philips |
| ECC189.pdf | en | 5 | |
| ECC189.pdf | fr | 4 | Mazda |
| ECC189.pdf | fr | 5 | La Radiotechnique |
EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34
How to use the Valve Archive
EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.
Datasheet PDF and frequent searches
The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.