archive
archive valves
archive
archive valves
EF860 tube: datasheets and technical data
Explore available pinout, electrical data and related types for the EF860 vacuum tube.
The EF860 is a high-transconductance RF pentode intended for preamplifiers in long-distance telecommunications systems. RFT’s February 1956 sheet from VEB Werk für Fernmeldewesen, Berlin, describes long life and correspondence with the EF800. However, it explicitly labels the data provisional and the type under development: the document date is not taken as a commercial introduction year. Construction uses a nine-pin Noval base, maximum diameter 22.2 mm, bulb height 60.3 mm plus 7 mm pins, approximately 12 g weight. The EF860 heater is specified at 6.3 V, 300 ±20 mA; the adjacent IF860 has 20 V, 95 ±6 mA. Their heater data remain separate.
The static point uses anode and screen 210 V, suppressor 0 V and cathode resistor 220 Ω, with first-grid bias approximately −2.75 V. Anode current is 10 ±1.5 mA, screen current 2.6 ±0.5 mA, transconductance 7.1 ±1 mA/V; internal resistance approximately 0.55 MΩ and screen-to-control-grid amplification factor 50. Another preamplifier point uses anode and screen 170 V, cathode resistor 160 Ω, anode current 10 mA, screen 2.5 mA, transconductance 7.5 mA/V and internal resistance 0.5 MΩ. At the 210 V point, input resistance is 3 kΩ at 100 MHz with pins 1 and 3 connected, equivalent noise resistance approximately 1 kΩ. Capacitances are input 7.5 ±0.6 pF, output 3.4 ±0.3 pF, grid–anode no more than 0.008 pF, anode–cathode no more than 0.012 pF.
Long life is accompanied by specific end-of-life criteria: anode current below 6.7 mA, screen current below 1.6 mA, transconductance below 5 mA/V or grid current above 1 µA. No guaranteed number of hours is stated here. The sheet stresses nominal heating conditions: ±5% parallel heater voltage and ±1.5% series heater current deviations are allowed only briefly. Limits include operating anode and screen 250 V, cold 550 V for both, anode dissipation 2.1 W, screen 0.55 W, cathode current 13 mA, first grid −30 to 0 V, maximum grid resistance 0.5 MΩ fixed bias or 1 MΩ self-bias. Heater–cathode limit is 150 V with maximum external resistance 20 kΩ; continuous-service valve temperature must not exceed 170 °C.
Tube images
Pinout and connections
Base: Noval (B9A)
Electrical data
Heater
- Heater voltage Vh
- 6.3 V
- Heater current Ih
- 0.295 A
Datasheet PDF
EL84 ECC83 12AX7 EL34 6L6GC 300B KT88 GZ34
How to use the Valve Archive
EnryLab Valve Archive allows you to search for PDF datasheets and technical documentation by entering the exact code of a vacuum tube. Enter codes such as EL84, ECC83, 12AX7, 6L6GC, or 300B to view variants, manufacturers, and documents available in the technical archive. The search uses exact matches, thus avoiding partial or irrelevant results and making it easier to find the correct datasheet.
Datasheet PDF and frequent searches
The most searched acronyms have dedicated and indexable pages, with clean URLs and linked documentation. You can start with frequent searches to quickly consult the most used valves in the audio, radio, and technical restoration fields.